Other Parts Discussed in Thread: AWR1843BOOST
各位前輩們好
我可以在CCS Debug模式下執行.xer4f 與 .xe674
但是當我執行GUI的時候,CCS總會在 exit.c中發生中斷,
[Cortex_R4_0] ********************************************** Debug: Launching the MMW Demo on MSS ********************************************** Debug: Launched the Initialization Task Debug: mmWave Control Initialization was successful Debug: mmWave Control Synchronization was successful [C674X_0] Debug: DPM Module Sync is done [Cortex_R4_0] Debug: CLI is operational Debug: Sending rlRfSetLdoBypassConfig with 3 1 0 Error: DPM Report 4 received with error:-40112 arg0:0x64 arg1:0x8003e88 {module#9}: "../mss_main.c", line 2174: error {id:0x10000, args:[0x1891c, 0x1891c]} xdc.runtime.Error.raise: terminating execution [C674X_0] Error: DPM Report 4 received with error:-40112 arg0:0x64 arg1:0x815c9c xdc.runtime.Main: "../dss_main.c", line 256: assertion failure xdc.runtime.Error.raise: terminating execution
請問我是否是遺漏了甚麼或還可以檢查什麼呢?
謝謝。