Other Parts Discussed in Thread: AWR1843
在高级设置里面选择添加两块awr1843之后，还需要设置其他的参数吗？
在启动如上图所示的连接配置文件后，选中其中一个awr1843的芯片进行“connect target”后出现了如下的报错，这该怎么解决呢？
CS_DAP_0: Error connecting to the target: (Error -1170 @ 0x0) Unable to access the DAP. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 9.7.0.00213) CS_DAP_0: Error connecting to the target: (Error -1170 @ 0x0) Unable to access the DAP. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 9.7.0.00213)
