CC256XCQFN-EM: LinuxSPPM和LinuxDEVM是否支持获取CC256XCQFN-EM模块的蓝牙收发状态

Zeng Zhishan

Part Number: CC256XCQFN-EM
Other Parts Discussed in Thread: CC2564C

Hello TI Technical Support Team,

I am encountering an issue while using the CC256XCQFN-EM module. I would like to inquire whether LinuxSPPM and LinuxDEVM support retrieving the Bluetooth transmit/receive status information of the CC256XCQFN-EM module. I need to obtain the transmit/receive status of the Bluetooth module to enable other chips accordingly.

If these two components do not support retrieving the transmit/receive status, could you please advise if there are alternative methods to determine the transmit/receive status of the CC256XCQFN-EM module or the CC2564C chip?

Thank you!

TI技术支持团队你好，

我在使用CC256XCQFN-EM模块时遇到了问题，想询问一下LinuxSPPM和LinuxDEVM是否支持获取CC256XCQFN-EM模块的蓝牙收发状态信息，我需要获取蓝牙模块的收发状态以便于给其它芯片进行使能。如果这两个组件不支持获取收发状态，是否有其它方法可以知道CC256XCQFN-EM模块或者CC2564C芯片的收发状态。

感谢！

1 个月前

0 Taylor 1 个月前

TI__Mastermind 49125 points

Hi,

We have received your post and the investigation will take some time. Thank you for your patience.

0 Taylor 1 个月前回复 Taylor

TI__Mastermind 49125 points

Are you trying to sniff / monitor the RX/TX traffic or act as an active endpoint with the CC256X? Answering that question will help me provide the proper resources and assistance.

0 Zeng Zhishan 1 个月前

Prodigy 30 points

We are going with the latter -- acting as an active endpoint.

0 Taylor 29 天前回复 Zeng Zhishan

TI__Mastermind 49125 points

After some digging, I require additional information from you.

Can you describe what particular transmit/receive statuses you are looking to obtain? It is not feasible to try to collect it from the Bluetooth stack because these transmit and receive statuses are instantaneous. Sending an HCI packet over UART and then getting something back will take long.

Bluetooth

蓝牙论坛

CC256XCQFN-EM: LinuxSPPM和LinuxDEVM是否支持获取CC256XCQFN-EM模块的蓝牙收发状态