This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2640 Power-on-Resset的阀值如何设置

Other Parts Discussed in Thread: CC2640

我们现在CC2640的板子发现个问题,设置芯片进入休眠模式后,拔掉电源,在快速上电,时间差在10s内,发现芯片不会启动运行。
    请问一下,规格书中Power-On-Reset threshold 这个阀值, 程序里面怎么设置?  我想把这个阀值调高一点(2.0V左右),让系统下电后,芯片供电电压下降到2.0V一下就reset芯片。