• 状态
  • 已锁定 已锁定
  • 回复 2 回复
  • 订户 9 订户
  • 视图 1200 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3200 FTDI 驱动出现问题；求助于TI

user3787631
Intellectual 310 points
Other Parts Discussed in Thread: CC3200, CC3100

   刚购买的CC3200的开发板，然后连接到电脑上，驱动出现如下情况

然后设备如下
我电脑系统如下：64it win7    战神K650D
  • 0
    TI__Guru**** 252096 points

    可以参考TI WIKI页面 http://processors.wiki.ti.com/index.php/CC31xx_%26_CC32xx_FTDI_Flashing 以及 http://www.ftdichip.com/Drivers/D2XX.htm

    If your CC3100/CC3200 is not recognized, install the FTDI D2XX driver.

    1. Install the the FT_PROG
    2. Connect the USB cable between the PC and your target board.
    3. Install either CC3200_SDK and/or CC3100_SDK package, depending on what platform you are using.
    4. Open FT_PROG and press F5 (or refresh) to refresh the list of connected FTDI devices.
    5. Right click the device and select erase.
    6. Right click the device choose Apply Template -> From file and choose the corresponding .xml template file from the download section above.
    7. Press Ctrl+P
    8. Reset board by unplugging and plugging USB cable.
  • 0 回复 Susan Yang
    Intellectual 310 points

    按照您说的。现在成这个样子了

     

    还要我写入什么.ROM的文件，而且IAR也不能烧录了。

     

    也不知道这是什么东西