• 状态
  • 已锁定 已锁定
  • 个回复 5 个回复
  • 名订阅用户 18 名订阅用户
  • 次查看 1125 次查看
  • 用户 0 名在线用户
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

cc2630接收协调器命令代码不执行而且断点打不上的问题

user6383350
Prodigy 130 points
Other Parts Discussed in Thread: CC2630

switch(pMsg->hdr.event)
{
     case zstackmsg_CmdIDs_AF_INCOMING_MSG_IND:
     {

// Process incoming data messages
zstackmsg_afIncomingMsgInd_t *pInd =
(zstackmsg_afIncomingMsgInd_t *)pMsg;
Switch_processAfIncomingMsgInd( &(pInd->req) );

}
break;

}

为什么这段代码不起作用呢

  • 0
    Guru 109510 points

    把IAR的optimize level調成low 或者是medium 再試試

  • 0
    TI__Guru* 82220 points
    数据包是否已经传入进来？抓个包看一下
  • 0 回复 Kevin Qiu1
    Prodigy 130 points
    今天又重新打断点调试看了下，原来协调器这端数据就没发送成功， 会执行到int suc=0;。为什么协调器广播发送数据到终端会失败呢？（禁用了EZ_MODE）.
    zclReportCmd_t *pReportCmd;

    pReportCmd = osal_mem_alloc( sizeof(zclReportCmd_t) + sizeof(zclReport_t) );
    if ( pReportCmd != NULL )
    {
    pReportCmd->numAttr = 1;
    pReportCmd->attrList[0].attrID = ATTRID_MS_TEMPERATURE_MEASURED_VALUE;
    pReportCmd->attrList[0].dataType = ZCL_DATATYPE_INT16;
    pReportCmd->attrList[0].attrData = (void *)(&zclSampleTemperatureSensor_MeasuredValue);
    afAddrType_t dstAddr;
    dstAddr.addrMode = (afAddrMode_t)AddrBroadcast;
    dstAddr.addr.shortAddr = 0xFFFF;
    dstAddr.endPoint = 20;
    dstAddr.panId = 0x8888;
    if(zcl_SendReportCmd( SWITCH_EP, &dstAddr,
    ZCL_CLUSTER_ID_MS_TEMPERATURE_MEASUREMENT,
    pReportCmd, ZCL_FRAME_SERVER_CLIENT_DIR, TRUE, ztsTransID++ )==ZSuccess)
    {
    int suc=1;
    }
    else
    {
    int suc=0;
    }
    }

    osal_mem_free( pReportCmd );
  • 0 回复 YiKai Chen
    Prodigy 130 points
    今天又重新打断点调试看了下，原来协调器这端数据就没发送成功， 会执行到int suc=0;。为什么协调器广播发送数据到终端会失败呢？（禁用了EZ_MODE）.
    zclReportCmd_t *pReportCmd;

    pReportCmd = osal_mem_alloc( sizeof(zclReportCmd_t) + sizeof(zclReport_t) );
    if ( pReportCmd != NULL )
    {
    pReportCmd->numAttr = 1;
    pReportCmd->attrList[0].attrID = ATTRID_MS_TEMPERATURE_MEASURED_VALUE;
    pReportCmd->attrList[0].dataType = ZCL_DATATYPE_INT16;
    pReportCmd->attrList[0].attrData = (void *)(&zclSampleTemperatureSensor_MeasuredValue);
    afAddrType_t dstAddr;
    dstAddr.addrMode = (afAddrMode_t)AddrBroadcast;
    dstAddr.addr.shortAddr = 0xFFFF;
    dstAddr.endPoint = 20;
    dstAddr.panId = 0x8888;
    if(zcl_SendReportCmd( SWITCH_EP, &dstAddr,
    ZCL_CLUSTER_ID_MS_TEMPERATURE_MEASUREMENT,
    pReportCmd, ZCL_FRAME_SERVER_CLIENT_DIR, TRUE, ztsTransID++ )==ZSuccess)
    {
    int suc=1;
    }
    else
    {
    int suc=0;
    }
    }

    osal_mem_free( pReportCmd );
  • 0 回复 user6383350
    Guru 109510 points

    CC2630 ZED如果是休眠狀態下是收不到广播的、發送信息給ZED建議用单播