DS90UB947-Q1EVM: The device info is DS90UH925 FPD-Link III not 947

Rookie Tu

Prodigy 10 points

Part Number: DS90UB947-Q1EVM
Other Parts Discussed in Thread: USB2ANY, ALP

Dear teams,

Always thanks for your help! Could you help me and give some comment.

Customers have already bought 947 , but I found some errors on GUI.

The device info is DS90UH925 FPD-Link III.
When TI-947 connect to Analog LaunchPAD tool, the Analog tools are slow .

Best Regards,

Rookie

2 年多前

+1 Kailyn Chen 2 年多前

TI__Guru**** 295050 points

Hello， please follow the below steps to try:

1) Click on USB2ANY/Aardvark Setup, a new window will open.
2) Chose the existing device, in the left hand side box, and click Remove.
3) Under “Select a Daughter Board" search for the required device profile, in this case DS90UB947, and click “Add” and then “Ok”.

0 Rookie Tu 2 年多前回复 Kailyn Chen

TI__Prodigy 10 points

Dear Kailyn,

The 947 can’t connect to ALP is solved. Because the DS90Ux947Q EVB board not with a 12 VDC power supply.

Best Regards,

Rookie

0 Kailyn Chen 2 年多前回复 Rookie Tu

TI__Guru**** 295050 points

Hi Rookie，

Thank you very much for your feedback.

接口

接口论坛

DS90UB947-Q1EVM: The device info is DS90UH925 FPD-Link III not 947