• 状态 TI Thinks Resolved
  • 已锁定 已锁定
  • 个回复 4 个回复
  • 答案 1 答案
  • 名订阅用户 14 名订阅用户
  • 次查看 357 次查看
  • 用户 0 名在线用户
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SYSCONFIG: I2C配置生成代码有错

QiaoNan
Intellectual 260 points
Part Number: SYSCONFIG
Other Parts Discussed in Thread: C2000WARE

在使用sysconfig v1.21工具进行I2C配置时，不勾选Default I2C Module Clock Frequency选项，生成的代码会调用I2C_initControllerModuleFrequency函数，此时生成的代码在代用该函数后缺少";"，导致编译报错。

自动生成的代码如下，注意标红行末尾缺少分号：

void I2C_EEPROM_init(){
    I2C_disableModule(I2C_EEPROM_BASE);
    I2C_initControllerModuleFrequency(I2C_EEPROM_BASE, DEVICE_SYSCLK_FREQ, I2C_EEPROM_BITRATE, I2C_DUTYCYCLE_33, I2C_EEPROM_MODULE_CLOCK_FREQUENCY)
    I2C_setConfig(I2C_EEPROM_BASE, I2C_CONTROLLER_SEND_MODE);
    I2C_disableLoopback(I2C_EEPROM_BASE);
    I2C_setOwnAddress(I2C_EEPROM_BASE, I2C_EEPROM_OWN_ADDRESS);
    I2C_setTargetAddress(I2C_EEPROM_BASE, I2C_EEPROM_TARGET_ADDRESS);
    I2C_setBitCount(I2C_EEPROM_BASE, I2C_BITCOUNT_8);
    I2C_setDataCount(I2C_EEPROM_BASE, 1);
    I2C_setAddressMode(I2C_EEPROM_BASE, I2C_ADDR_MODE_7BITS);
    I2C_disableFIFO(I2C_EEPROM_BASE);
    I2C_setEmulationMode(I2C_EEPROM_BASE, I2C_EMULATION_FREE_RUN);
    I2C_enableModule(I2C_EEPROM_BASE);
}