This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我目前正在设计一个使用 BQ40Z50-R2的2串电池组。 请帮忙审阅我的原理图是否存在错漏，以确保在PCB设计之前没有重大问题。谢谢！
Schematic_BQ40Z50-2S-250929.pdf
已经收到了您的案例，调查需要些时间，感谢您的耐心等待。
此问题已被分配，将由团队中的某个人在可能的情况下审阅。与此同时，您可以随意附加任何相关的。log/。这个项目的gg/测试文件。
这种情况下，VC3和VC4需要连接到VC2。BAT+是否依附于VC2？
BAT+依附于VC2
Yes, is the BAT+ connection also connected to VC2? This should be the top of stack voltage in this case, so they should be the same.
BAT+与VC2是互相连接的
