This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR6843AOPEVM: FPGA不能识别

Part Number: AWR6843AOPEVM
Other Parts Discussed in Thread: DCA1000EVM, MMWAVEICBOOST,

根据DCA1000EVM使用指南e2echina.ti.com/.../dca1000evm进行操作,一直卡在第九步第6个点处。

输出端口显示如下:

路径选择:C:\ti\mmwave_studio_02_01_01_00\mmWaveStudio\PlatformBinaries\DCA1000FPGA\DCA1000_FPGA_RECORD_V2.8_05JUL2019.bit

防火墙,电源,网络连接等均已排除错误,但是仍然还是不能识别,并且已经按照这里https://www.ti.com/lit/ug/spruij4a/spruij4a.pdf的操作进行过,还是不能排除错误。

并且我不知道DCA1000EVM板子到底应该用数据线连接FT01还是J4端口,我一直连接的FT01端口,当我换用J4端口或者两个端口一起连接均不能成功。实在不知道该如何解决这个问题,已经困扰我两天了。

期待尽快回复!

谢谢!